wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.



====== Pixhawk Autopilot Connector Standard ======

The Pixhawk connector standard is intended for in-vehicle, cross-PCB use. It uses the JST GH series, which offers a latch lock mechanism at a small size and a very competitive cost, and it's used across multiple Pixhawk Standards as the default connector.


The Pixhawk Autopilot Connector Standard is documented as part of the [[https://pixhawk.org/standards/|Pixhawk Reference Standards]] and is referred to as the official Pixhawk DS-009 Standard, the latest up to date version can be found on GitHub.

* [[https://github.com/pixhawk/Pixhawk-Standards/blob/master/DS-009%20Pixhawk%20Connector%20Standard.pdf|DS-009 Pixhawk Connector Standard]] (GitHub)

> Note, this was originally referred to as the "Dronecode Autopilot Connector Standard."

wiki

User Tools

Site Tools

Page Tools